FIVE THINGS YOU DON'T KNOW ABOUT SECURITY LOCK FOR VAN

Five Things You Don't Know About Security Lock For Van

Five Things You Don't Know About Security Lock For Van

Blog Article

Choosing the Right Security Lock For Your Van

A good security lock can deter thieves and secure your cargo. Certain locks can be installed by the homeowner, whereas others require assistance from a professional to ensure they are properly installed and offer maximum security.

Slam locks are perfect for couriers who have multiple deliveries. They lock automatically when the door is slammed shut. Deadlocks are designed to work with your manufacturer's lock and offer an additional layer of security.

Deadlocks

Van dead locks are a second physical security measure that serves as an effective deterrent to criminals. These locks are specially designed for aftermarket use. They protrude into the van door and connect to the frame, ensuring they cannot be opened unless keys are used. These locks are especially useful for vans that must be kept overnight, or have expensive equipment.

These are ideal for those who use the remote locking systems that are supplied by the manufacturer during the day but want to add an extra layer of security at night or when their vehicle is located in an area that they believe to be vulnerable. When controlled by a key, they throw a bolt into a receiver attached to the opposite body section of the vehicle. This provides an extra layer of security over the locks that are factory installed.

Contrary to Slam locks and Hook Locks (both available in our online store) which lock automatically when the door is shut They require the user to operate with the supplied key. A straight bar lock is suitable for rear doors as well as a twin sliding doors, while hook locks can be used on both rear and front doors of small to medium vans.

They are both designed to stop thieves from gaining access to the lock and forcing it open, which could otherwise permit access to the van's cab or load area. They're specifically designed for each van model and are located in the best place to provide an extra layer of protection against a specific attack methods.

The consequences of van theft can be important, particularly for professionals like tradesmen and contractors who rely on vehicles to transport vital tools and equipment they cannot afford to lose. Apart from the cost to replace stolen items, it can cause loss of income due to unplanned downtime and the hassle of finding alternative means of transport. Installing a van lock that is of top quality can safeguard your possessions, decrease the risk and discourage thieves. It could even reduce insurance costs.

Hook Locks

A hook lock for vans is an effective anti-theft device that is able to be fitted on the door of your vehicle. It works independently from the manufacturer's locks and must be operated with a key that is fully controlled by the driver. It is an open-ended lock that can't be opened by force. It is constructed from premium materials. It's also highly resistant to manipulation and drilling. Many models are designed to meet police-approved specifications and have been approved by Sold Secure, the UK's most trusted testing authority for security products.

When buying a security lock for your vehicle, you need to be aware of the level of security you need. For instance, if carry expensive tools or sensitive cargo, a more sophisticated lock, such as deadlock or slam will be more suitable. On the other side, if you're carrying items of lesser value or tools, a simple lock such as a slam may be sufficient. In addition it is important to verify the insurance policies of your provider to ensure that additional locking mechanisms will not void your coverage.

When choosing a security locking system, you must also consider its weather resistance. Since vans are exposed to elements, your locks should be able to stand up to different weather conditions. This will ensure that they don't lose their effectiveness and become more difficult for thieves to manipulate. Additionally, you should be aware of software updates for electronic locking systems to avoid security weaknesses and improve their efficiency.

It is also important to select the lock that is simple to install. Certain locks are designed to be used for DIY installation while others need professional installation to ensure they're installed correctly and perform in the way they were intended to. Your level of expertise, confidence level and the resources you have at hand will determine if a professional is needed to install the product.

Catalytic Converter Locks

Catalytic converters can reduce harmful emissions from your vehicle. This vital part is the target of thieves because of the precious metals that they contain. The black market value of these precious materials has led to a rise in the amount of stolen converters. There are preventive measures available to tackle this issue.

Many people believe that a simple security system will suffice however, they are not as efficient than a device that is designed specifically to guard your converter. These devices emit loud noises to frighten potential thieves when they detect heat or vibrations. These devices are closer to deterrents than protection systems and they tend to cost more than a standard lock.

The Cat Clamp converter lock, a patented design, is an established and tested method to stop the theft of catalytic converts. This lock is made of a stainless steel wire that is wrapped around the catalytic converter and frame of the car. It is wrapped and locked up to seven times, making it incredibly difficult for thieves to get the converter. The unit can be set up in less than 30 minutes and does not require drilling or welding. It is simple to install and can be used on a variety of vehicles, including automobiles, trucks, and SUVs.

A metal plate covering the entire catalytic converter is another option to protect it. While it is not as simple to install as a cage made of steel however, it makes the converter much more difficult to take. The cost of these plates can range between $150 and $270, depending on the brand.

Remember that no security system can be perfect, but taking preventive measures will lower the risk of theft. It is essential to make the effort to properly secure your van. This will keep you and all your possessions safe and save you money on the replacement of expensive parts. It's also a good idea to have your catalytic convert marked with your get more info VIN, since it will allow you to identify it when it is reclaimed and resold.

Anti-Peel Kits

Designed to prevent against the well-known "Peel and steal" method, this solution is mounted to the front edge of the side load door. This increases the resistance of your van's door to 'peel-and-steal attacks by as much as 300%. The L4V Anti-Peel Kit, in combination with a well-placed hook lock, reduces the possibility that thieves can gain entry to your van via the side-load door.

It is important to use additional security measures for vans because of the rising number of van crimes and thefts. One of the most advanced methods is known as "peel and steal," and sees thieves swiping tools and goods from vans in a matter of seconds by applying pressure to the doors with their knees, then twisting, pulling and prying them open to reveal the contents of the load area. This kind of attack is now a common occurrence costing tradespersons throughout the UK thousands of pounds in lost tools and stock.

At Locks 4 Vans we have launched a new combined high hook lock with an anti peel kit for the Ford Custom to provide a cost-effective solution to this growing problem. The Anti-Peel Kit is fitted to the barn door of your Ford Custom reducing the chance of 'peel and steal' attacks by reinforcing the door's skin, and providing an additional layer of protection. The high L4V hook locks are built into the barn door to help strengthen it and ensure it's secure even if the anti-peel plates were removed.

Our anti-peel kits can be purchased online and delivered directly to your van in a just a few days. Our expert engineers can then install the product for you. We have installers located in Greater Manchester and Tameside so are able to offer our services to areas such as Manchester, Salford, Stockport, Ashton Under Lyne, Oldham and Rochdale.

If you'd like more information about improving the security of your van contact us today. We offer a range of different options that can help you improve the protection for your van, from deadlocks to armour locks and even shielding to defend against puncture attacks.

Report this page